What are locking casters for chairs?locking casters for office chairs are a set of 5 wheels in a swivel frame with kinds of hard floors or carpet. they are usually used for the support and movement of office chairs. The universal standard size is 7/16" x 7/8" (11mm x 22mm) sockets for stems. The different dimensions are locking casters diameter, width, and height. This locking casters for office chairs diameter was available 60 mm with brake function. The width of this locking casters available 49mm.The height of this locking caster available 70mm.
- Easy to install
- Simple lock
- Set of 5 Wheels
- Durable PA plastic
- Kind to most surfaces
- Custom colors
- See dimension picture as below
This locking casters for chairs usage in office room,meeting room.see pictures below
Why Choose our locking casters for chairs?
Locking casters for chairs manufacturing steps
Where are we exported this locking casters for chairs?
Locking casters for office chairs can be used for a wide variety of applications, It is important to have the right caster for the right application, the right size caster will be the difference of having a working application to not working at all. Taking key measurements will ensure that the caster will fit for the application. The following are 4 areas to measure.
Locking casters for office chairs diameter
To determine your locking casters for office chairs diameter, lay the caster down on its side and measure from the center of the kingpin to the back edge of the wheel. A straight edge lying up against the face of the wheel will make it much easier for you to determine this measurement; the point where the tape measure meets the straight edge will determine your locking casters for office chairs diameter.
Locking casters for office chairs overall Height
How to measure the locking casters for office chairs overall height? from the very bottom of the locking casters to the very top of the Chair mechanism. This is simple enough; just lie the castor on its side and take the measurement. Again, write these numbers down and be sure they’re appropriately labeled.
locking casters for office chairs Width
This is often called the tread width. It represents the width of the caster wheels face, measured without a load present.
How to measure the for locking casters for office chairs width?stand the for locking casters wheels upright and measure from the outside of one side to the outside of the other.
locking casters for office chairs stem
Use a ruler to measure from the top of the stem to the base plate and Overall length of stem.
You can also use a standard set of wrenches, for instance take a 7/16”. Use the open end of the wrench and put it on the stem, it should be a snug fit. Always measure the widest area.
Adjustable Wrench: Tighten the adjustable wrench around the widest part of the stem. Then take a ruler and measure the distance of the wrench opening.
If you have a caliper, measure the stem in the section below the ring toward the caster body using your caliper.
Grip Ring stem and silence grip ring stem regular diametsilence grip ring er approx 7/16″equal to 11mm . regular length approx 0.826 inch equal to 21mm
Please consult the factory for latest price and details.
Call us,Email us,Let's start the business now.
Are you looking for other hardware office chair parts?
Harware Office chair parts are including below, Go ahead to click it: