When you buy an gaming chair online, don't too rush to install it, it's easy to make mistakes. The first step is that you must check the number of parts, A gaming chair accessory generally includes: 5*caster wheels + 1*chair base+ 1*gas lift cylinder and 1*dust cover + 1 butterfly mechanism + 1*pair chair armrests and corresponding plastic cover+ several screws and Allen + 1*headrest 1+1 lumbar pillow + 1 backrest + 1 seat.
The second step is to install the gaming chair wheels; insert the 5pcs gaming chair wheels directly into the five-star chair base hole, our company has the same standard gaming chair wheels, just put it in a little harder.
The third step is to install the gas lift cylinder ; this step is the easiest! Install the gaming chair wheels in the reverse direction, and directly put the gas lift cylinder into the center hole of the five-star base without any other fixing. If there is a dust protection cover, it is also directly put on.
The fourth step is to install the butterfly mechanism; align the distance for hole to hole of the seat, insert the right screws, and tighten with a wrench.
The fifth step is to install the armrest; align the armrest with the seat hole position, install the gasket first, then insert the armrest screw, and tighten it with a wrench. The armrest has three or four holes, and the holes must be aligned! Don't use too much force 90% elastic is enough.
The sixth step is to connect the backrest; the backrest must be installed carefully, paying special attention to the alignment of the distance of holes to holes, first install the iron parts , and then install the plastic protective shell,in the end tightened with screws.
In the seventh step, the headrest and waist pillow are generally equipped with elastic bands and adjustable buttons, which can be buckled directly.
In the eighth step: Overall assembly; align the installed upper part, insert it into the gaming chair gas lift cylinder, press the seat tightly, align the gaming chair gas lift cylinder at the position of the butterfly mechanism, and then press hard a few times, To make sure installed chair properly you have to lift the seat to see if gaming chair can fall off .
The ninth step is complete; don't sit in a hurry, shake left and right back and forth to check the tightness;